And what are the pros and cons of this design?
There are generally three places you can check once the dust canister has been removed:.The entrance vent to the dust canister..
The tube that exits the dust canister.. A third tube that’s often hidden behind a transparent hatch..Step 2: Check the Brush Roll for Blockages.One of the most common places for a blockage or tangle is the brush roll.. Start by removing the floorhead from the main vacuum, then flip the two tabs to remove the bottom plate.
This will give you easy access to the entire brush roll.. Next, use a pair of scissors to cut away any hair of string that’s become caught around the brush roll.While every vacuum will have some pet hair caught around the brush roll, this step is particularly important if you have pets or people in your household have long hair..
Finally, check that there’s not a blockage at the entrance to the main suction tube.
Then reassemble the floorhead and reattach it to the vacuum cleaner..Vacuuming is effective at removing dirt and other abrasive debris from your hard floors, but.
sweeping can still be effective.A broom is particularly useful if you only have a vacuum with a powered brush bar that may damage the floors.
Brooms are also quiet, never run out of dust capacity, and are often more convenient than a bulky upright vacuum.. Vacuuming with a hardwood-safe vacuum is always the most effective way to clean floors though.Sweeping can also stir fine dust and other allergens into the air, while a vacuum with a HEPA filter should catch most of these particles.. Other Tips for Cleaning Wood Flooring.
(Editor: Pro Webcams)